+64 9 273 4103
InverClear Salt Chlorinator NZ
More images
iGarden

InverClear Salt Chlorinator NZ

Trade customers: see your pricing in the Aqua Clear trade portal. Not a trade customer? Use Enquire / Get a quote below.

Specifications

ModelChlorine outputPool volume*Max power
ICS1010 g/h15–45 m³60 W
ICS1616 g/h25–65 m³85 W
ICS2222 g/h35–75 m³110 W
ICS2828 g/h45–100 m³130 W

*Water up to 28°C. For hot pools or heavy use, size up (the brochure says reduce the rated volume by 25–40%).

Features and benefits

InverClear by iGarden is a salt chlorinator with automatic chlorine and pH control, made for NZ pools. An ORP sensor checks the chlorine level and switches the cell on and off as needed, while a pH probe and built-in pH regulator keep pH where it should be, so there's no separate pH unit to fit. It comes in four sizes: ICS10 for pools of 15–45 m³, ICS16 for 25–65 m³, ICS22 for 35–75 m³ and ICS28 for 45–100 m³ (based on water up to 28°C), and carries a 5-year warranty. Pool builders, shops and service companies can buy it at trade prices from Aqua Clear, with technical support from our East Tamaki team.

How InverClear compares with all-in-one units like Zodiac eXO iQ pH

Zodiac's eXO iQ range and InverClear take the same approach: salt chlorination and automatic pH control in one system, run from a single controller with app or Wi-Fi access. Both are good options. Where InverClear differs:

  • Inverter output (0–100%): chlorine output follows demand, and it drops to Auto Low Mode or stops when the pool is covered, which helps avoid over-chlorinating.
  • ORP chlorine sensing as standard on every model.
  • Four sizes up to 100 m³, with a self-cleaning cell (2/4/6 h options) and a replaceable electrode.
  • 5-year warranty, backed in NZ by Aqua Clear.
  • NZ trade support: stocked and backed by Aqua Clear, with trade pricing for pool builders, shops and service companies.

Compare cell sizes, warranty and the price of a replacement cell before choosing. Check Zodiac's current spec sheet for their figures; we haven't quoted them here.

Warranty and service is handled through our local agent network. Email info@aquaclear.co.nz or call 09 273 4103 to arrange.

Frequently asked questions

Does InverClear control pH automatically?

Yes. A pH probe reads the water and the built-in pH regulator doses acid to keep pH in range (around 7.4 is comfortable for swimmers). It works with any pool acid; hydrochloric is the most common. An external dosing pump can be used instead.

What size InverClear do I need?

ICS10 for 15–45 m³, ICS16 for 25–65 m³, ICS22 for 35–75 m³, ICS28 for 45–100 m³. If the pool is heated above 28°C or gets heavy use, go up a size.

How much salt does it need?

3–5 g/L, with 3 g/L recommended. The unit checks salinity (to ±500 ppm) so you know when to top up.

Does the cell need cleaning?

It cleans itself on a 2, 4 or 6 hour cycle (4 h by default). The electrode can be replaced, and cell life is rated at 10,000 hours.

Can I control it from my phone?

Yes, it has Wi-Fi, plus MODBUS RS485 and a dry contact for linking to automation. You control it with the iGarden app.

Will it fit my existing plumbing?

The cell suits 63, 60.3, 50 and 48.3 mm connections, and flow of 5–18 m³/h.

How do I buy InverClear in NZ?

Trade customers can see pricing and order through the Aqua Clear trade portal. Homeowners can use Enquire / Get a quote, and we'll point you to an installer.

What warranty does InverClear have?

5 years, supported in NZ by Aqua Clear.

Pool builder, shop or service company?

Open an Aqua Clear trade account for wholesale pricing, stock availability and technical support.

© 2026 Aqua Clear Products Ltd. All rights reserved. Website design by fuel.